Skip to main content

How to Easily Connect Your Samsung Phone to Your Computer

Have you experienced having some troubles connecting your Samsung phone to your computer? Well, if you don't have the appropriate software for this, it will surely give you some nuts. As for my personal experience, I bought my Samsung Wave S525 last December 2010. At first, I had some troubles opening my files when I connected it to my computer. But thank be to God because I've found the very best software where I can easily access my files in my phone when I connected it to my computer - SAMSUNG KIES. Through this, I can also easily update my phone whenever there is a latest Samsung device.

What is Samsung Kies? It is software that is used to communicate between the latest Samsung devices. Whenever you plug or connect your phone into your computer using this software, it'll automatically update the firmware of your phone. When there is a latest device released, it will appear it on the computer and once you download or install it, your phone will be automatically be updated. Here's how you can install Samsung Kies in your computer easily.

First, you must have to download the software here.

Second, install the Kies after you download it. Then wait for few minutes until it’ll finish installing. Be sure to read every instruction(s) during the installation process. You can choose whether you like to have a desktop shortcut of the software for you to easily access or open it (In my case, I made a shortcut of the Kies in my desktop).

Lastly, try to plug your Samsung phone and open the software. Mostly, an update of the firmware will first appear on it after you install and open it. You it’s much better to update it.

Enjoy and have fun using the Samsung Kies for you Samsung mobile. It is very well tested!
Labels:

Comments

Post a Comment

Only positive comments are accepted. Thanks!

Popular posts from this blog

How to fix Antec Kuhler H2O 620 Cooler Noise

My six-core rig is now running but I have problems with the AMD stock cooler. It seems that my motherboard’s (Gigabyte GA 890GPA-UD3H) CPU fan control push the fans speed to higher limits that it starts to make noise when the computer runs for a longer time or when it starts. I have already used the Easy Tune 6 utility from Gigabyte and though I controlled the speed of the fans, it will still run up to 6000 rpm when the computer boots. Therefore, I decided to find a quieter CPU cooler. I ran to the computer shop and the only CPU cooler that they have is the Antec Kuhler H2O 620. I was only thinking of an air cooler but the time I saw the box, I was indulge to it. Liquid cooling system is not really my first choice because it is more expensive. However, we the alarming noise I am experiencing on my new six-core PC, I have no reason not to buy it. I admit the installation manual and even the forums I read on the internet were a little bit confusing, but I still managed to instal...
1 comment
Read more

How to fix notebook hard disk error (Neo Basic B3233)

Yesterday, my NEO Basic B3233 notebook crashed down and it would not boot anymore. My first diagnosis is overheating or it is just the brownout, which causes some electrical surges on the computer. I rested it for a while but when I boot it again, it says DISK ERROR. I would like to explore more on the causes of the error but I guess I do not have enough time for it. So, I'd better be starting my fix ASAP. Since it is a Hard Disk error, the problem is of course the hard disk and not the hardware, because it is not too old. My guess is the system inside it. Windows 7 might encounter an error that it is in tack anymore. Therefore, my best fix would be reformatting the hard disk and have a clean OS installation. I cannot use Windows 7 hard disk repair or error checking this time because it will not boot. The computer is useless this time so I need to remove the hard disk. How to remove a notebook hard drive? It is usually found under your notebook and it has screws ...
Post a Comment
Read more

How To Install Steam OS Without UEFI motherboard

I will teach you how to install Steam OS into your motherboard that does not have UEFI bios. The default Steam OS installation requires UEFI bios or it will not work. I did some Googling and found a way to bypass that and everything works perfectly afterwards. It is just slightly more difficult but do not worry. For those who do not know what steam OS is, it is an operating system created by Valve. It is a Linux with Debian Weezy on top and can run Linux programs if you want to.
Post a Comment
Read more