Skip to main content

How to connect your blog to your Google plus profile and page in Blogger New Interface

Social Networking is very effective in SEO and internet marketing. Moreover, Blogger helps us to maximize that by adding the Google plus (+) profile and page connection to the platform. This means after you created your Blogger account, you will automatically have a Google plus profile and a chance to have a Google plus page. Here is how to connect them:

1. In your Blogger Dashboard, click the name of the blog you want to connect.

2. Click the Google + menu at the left side of the interface.

3. You can decide to connect your Google plus profile or not. If you choose to connect it, the Google account you used for Blogger will automatically your Google plus account. You can also edit your Google plus profile here (https://plus.google.com/).

If this is your first time to use your Google plus account, you can start by adding people or friends; add your profile photo and some information about you. Be sure to read Google’s Privacy Policy here (http://www.google.com/intl/en/policies/privacy/).

4. Check the radio that says; “Prompt to share after posting” so that you will know what to share or not to your Google plus profile. This means after you publish your post, a prompt will be shown allowing you to share your post to your circle or not. Always remember that sharing a post to lots of people will give you a chance for more visitors.

5. You can also connect your blog to your Google plus page. Click CREATE A NEW PAGE button below the page. This is like creating a Facebook page if you tried it already.

Choose the category of your page from Local Business to Sports. Add some information and start using your Google plus page. You can also have the chance to publish your blog posts automatically to your Google plus page.

After everything is set:

You can create a new post and publish it. See for yourself how Google can help you publicize your blog.
Labels:

Comments

Post a Comment

Only positive comments are accepted. Thanks!

Popular posts from this blog

How to fix Antec Kuhler H2O 620 Cooler Noise

My six-core rig is now running but I have problems with the AMD stock cooler. It seems that my motherboard’s (Gigabyte GA 890GPA-UD3H) CPU fan control push the fans speed to higher limits that it starts to make noise when the computer runs for a longer time or when it starts. I have already used the Easy Tune 6 utility from Gigabyte and though I controlled the speed of the fans, it will still run up to 6000 rpm when the computer boots. Therefore, I decided to find a quieter CPU cooler. I ran to the computer shop and the only CPU cooler that they have is the Antec Kuhler H2O 620. I was only thinking of an air cooler but the time I saw the box, I was indulge to it. Liquid cooling system is not really my first choice because it is more expensive. However, we the alarming noise I am experiencing on my new six-core PC, I have no reason not to buy it. I admit the installation manual and even the forums I read on the internet were a little bit confusing, but I still managed to instal...
1 comment
Read more

How to fix notebook hard disk error (Neo Basic B3233)

Yesterday, my NEO Basic B3233 notebook crashed down and it would not boot anymore. My first diagnosis is overheating or it is just the brownout, which causes some electrical surges on the computer. I rested it for a while but when I boot it again, it says DISK ERROR. I would like to explore more on the causes of the error but I guess I do not have enough time for it. So, I'd better be starting my fix ASAP. Since it is a Hard Disk error, the problem is of course the hard disk and not the hardware, because it is not too old. My guess is the system inside it. Windows 7 might encounter an error that it is in tack anymore. Therefore, my best fix would be reformatting the hard disk and have a clean OS installation. I cannot use Windows 7 hard disk repair or error checking this time because it will not boot. The computer is useless this time so I need to remove the hard disk. How to remove a notebook hard drive? It is usually found under your notebook and it has screws ...
Post a Comment
Read more

How To Install Steam OS Without UEFI motherboard

I will teach you how to install Steam OS into your motherboard that does not have UEFI bios. The default Steam OS installation requires UEFI bios or it will not work. I did some Googling and found a way to bypass that and everything works perfectly afterwards. It is just slightly more difficult but do not worry. For those who do not know what steam OS is, it is an operating system created by Valve. It is a Linux with Debian Weezy on top and can run Linux programs if you want to.
Post a Comment
Read more